2 Player The J" Upright Arcade Cabinet Kit for up to a 32" Screen
Standing at almost 64" tall and 31" wide, this colossal kit contains the pre-cut, routed and pre-drilled MDF for a DIY upright arcade cabinet, and is the ONLY kit to feature the following:
VESA Mounting Panel for a 32" Widescreen TV or 32" Widescreen Monitor (Up to 30" wide)
Pre-routed integrated marquee bracket
Pre-routed baton indents for easier assembly
Adjustable horizontal monitor positioning
Pre-drilled holes for mounting two 4" speakers
Pre-drilled holes for mounting 2 Joysticks
Pre-drilled holes for cabinet assembly
Numbered baton supports and the 42 screws for basic assembly
To assemble the basic cabinet, all you need to supply is the wood glue and a screwdriver (cordless screwdriver or drill with phillips bit preferred).
That's right, all parts needed to assemble the basic cabinet are included (except for the wood glue)!
For a complete assembly, we suggest the following parts (not included):
Up to 32" Widescreen LCD Monitor (cabinet has 30" internal width)
4 screws for LCD VESA Mount (4 or 8 washers are suggested)
2 Joysticks with HAPP or SANWA mounting pattern
8 Screws, 8 washers, and 8 nuts for joystick mounting
Up to 20 HAPP Standard Arcade Buttons [1 1/8" or 28mm]
Up to 16 Sanwa Style Arcade Buttons [30mm] and 4 Coin/Start buttons [24mm]
[With the trackball option, a trackball utilizing mounting plate - Trackball cut out is 4" square]
2 4" Speakers
8 screws, 8 washers, 8 nuts for speaker mounting
Game system (Raspberry Pi, Udoo, Odroid, Game Elf, Pandora's Box, PC, etc)
Wiring (as needed by Game System, speakers, and monitor)
Plexiglass to cover LCD (optional/personal taste)
Marquee backlight (optional/personal taste)
Interior Width: 30"
Exterior Width: 31"
Exterior Height: 63 3/4"
Exterior Depth: 20 1/4"
Weight: 89 lb
The assembly was easy enough to be completed by one adult arcade enthusiast.
NOTE: The monitor mounting panel is placed where it is in the photo so it could be clearly seen, not where it is recommended to be placed(ideally it should be further back). If you have any questions, feel free to ask.
|Joystick Mount||HAPP or SANWA|
|Button Hole Diameter||HAPP: 1 1/8" (28mm) SANWA: 30mm and 24mm|
|Shipping||Included in cost|
|Batons||22 (1-7 2/ea)|
LVL 32J 2 Player Upright Arcade Cabinet Kit for up to a 32" screen
- Brand: LEP1 Customs, LLC
- Product Code: LVL 32J 2 Player Upright Arcade Cabinet Kit for 32" screen
- Availability: In Stock